-
Are the enzymes that are used in the Megazyme products stable when shipped at ambient temperature?
-
Should the pH of the sample be adjusted even for samples in acidic media?
-
I have some doubts about the appearance/quality of a kit component what should be done?
-
When using the K-ACHYD Assay Kit for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the K-ACHYD Assay Kit?
-
What is the linear range of the K-ACHYD Assay Kit?
-
Does the decolourising preparation in the Acetic Acid kits remove some VA during the process?
-
What are the major differences between the various Acetic Acid test kits?
-
Which Acetic Acid kit is recommended for a 96-well microplate format?
-
When using the Acetic Acid Kit (K-ACET) for quantitative analysis what level of accuracy and repeatability can be expected?
-
Is the Acetic Acid Kit (K-ACET) specific for acetate?
-
What is the range of the Acetic Acid Kit (K-ACET)?
-
Is the Acetic Acid Kit (K-ACETRM) specific for acetate?
-
When using the Acetic Acid Kit (K-ACETRM) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the range of the Acetic Acid Kit (K-ACETRM)?
-
When using the Enzymatic Yeast β-Glucan Assay Kit (K-EBHLG), should the sample pH be adjusted even for samples in acidic media?
-
There are crystals in my GOPOD reagent buffer. Is this normal and will it affect my assay?
-
What is difference between β-Glucan (Yeast & Mushroom) Assay Kit (K-YBGL) and Yeast Beta-Glucan Assay Kit (K-EBHLG)?
-
Is the α-Amylase Assay Kit (Ceralpha Method) (K-CERA) suitable for measuring porcine pancreatic alpha-amylase?
-
We would like to know where the coefficient of 18.1 (EmM of p-nitrophenol) comes from? What does it mean?
-
Any recommendations on using your α-Amylase Assay Kit (Ceralpha Method) (K-CERA) assay at a low pH (pH 3-4)?
-
Is either α-Amylase Assay Kit (K-CERA or K-AMYLSD) suitable for quantifying trace amounts of alpha-amylase activity in a pullulanase preparation?
-
Is the α-Amylase SD Assay Kit (K-AMYLSD) suitable to measure alpha-amylase in cooked breads? If so, do I need to alter the procedure?
-
How long does a single analysis take using α-Amylase SD Assay Kit (High Sensitivity Method) (K-AMYLSD) to compare with the Hagberg Falling Number method?
-
Is the Ceralpha Alpha-Amylase Assay Reagent (R-CAAR4) or the Amylase HR Assay Reagent (R-AMHR4) preferable for use a pH 6-7?
-
Can the Ceralpha Alpha-Amylase Assay Reagent (R-CAAR4) be used for the determination of fungal alpha-amylase?
-
Can the Ceralpha Alpha-Amylase Assay Reagent (R-CAAR4) be used to analyse the alpha-amylase content of meat?
-
Is the Ceralpha α-Amylase Assay Reagent (R-CAAR4) or the Amylase HR Assay Reagent (R-AMHR4) preferable for use a pH 6-7?
-
Can the α-Amylase HR Assay Reagent (R-AMHR4) be used for the determination of fungal alpha-amylase?
-
Any recommendations for using the α-Amylase HR Assay Reagent (R-AMHR4) at pH 3-4?
-
With your Amylose/Amylopectin Assay Kit (K-AMYL) can you calculate the amylose content from the Con A supernatant absorbance without performing the total starch section if you have recorded the weight of the sample?
-
Can Amylose/Amylopectin Assay Kit (K-AMYL) also be used for total starch determination?
-
Do you provide any information in your Amylose/Amylopectin Kit (K-AMYL) for the separation of the two starch fractions?
-
Why does the Amyloglucosidase Assay Reagent (R-AMGR3) contain PNP-beta-D-maltoside and not PNP-alpha-D-maltoside, since amyloglucosidase is specific for alpha-1,4-D-linked glucans?
-
Can the Amyloglucosidase Reagent (R-AMGR3) be used to measure Amyloglucosidase (E-AMGDF) levels in malted barley and what is a suitable extraction procedure to use for ground malt?
-
In what absorbance range should I use Amyloglucosidase (E-AMGDF) with Amyloglucosidase Assay Reagent (R-AMGR3)?
-
When using the L-Arabinose/D-Galactose Assay Kit (K-ARGA) for quantitative analysis what level of accuracy and repeatability can be expected?
-
Can oligosaccharides or polysaccharides be measured using the L-Arabinose/D-Galactose Assay Kit (K-ARGA)?
-
What is the detection limit of the L-Arabinose/D-Galactose Assay Kit (K-ARGA)?
-
When using the L-Arginine/Urea/Ammonia Assay Kit (K-LARGE) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the L-Arginine/Urea/Ammonia Assay Kit (K-LARGE)?
-
My A1 values for L-Arginine/Urea/Ammonia Assay Kit (K-LARGE) blank and samples have an absorbance greater than 1.0. Is it correct for my A1 values to be this high?
-
Is it possible to adapt the Ascorbic Acid Assay Kit (L-Ascorbate) (K-ASCO) for use on various auto-analysers?
-
What absorbance value should be attained using the ascorbic acid standard supplied with Ascorbic Acid Assay Kit (L-Ascorbate) (K-ASCO)?
-
Is it possible to measure dehydroascorbic acid with the Ascorbic Acid Assay Kit (L-Ascorbate) (K-ASCO)?
-
When using the L-Asparagine/L-Glutamine/Ammonia Assay Kit (Rapid) (K-ASNAM) for quantitative analysis what level of accuracy and repeatability can be expected?
-
When using the L-Asparagine/L-Glutamine/Ammonia Assay Kit (Rapid) (K-ASNAM) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the L-Asparagine/L-Glutamine/Ammonia Assay Kit (Rapid) (K-ASNAM)?
-
Can the Cellulase Assay Kit (CellG3 Method) (K-CellG3) be used to measure thermostable cellulase enzymes?
-
What assay methods do you recommend for kinetic analyses of cellulases and xylanases (kit, tablets and soluble/insoluble dyed substrates)?
-
Are most cellulase more active against CellG5 reagent than the CellG3 reagent as used in the Cellulase Assay Kits (K-CellG5 or K-CellG3)?
-
When using the Citric Acid Assay Kit (K-CITR) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the Citric Acid Assay Kit (K-CITR)?
-
What is the linearity of the Citric Acid Assay Kit (K-CITR)?
-
I am experiencing problems obtaining consistent/accurate results using the Ethanol Assay Kit (K-ETOH / K-ETOHLQR) – what should I do?
-
When using the Ethanol Assay Kit (K-ETOH) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the range of the Ethanol Assay kit (K-ETOH)?
-
What is the stability of enzymes for Total Dietary Fiber Assay Kit (K-TDFR)?
-
Which kit is most suitable to determine insoluble and soluble dietary fibre in barley?
-
Are the lower temperatures of 90˚C to 95˚C adequate for the hydrolysis if we extend the incubation time in the Total Dietary Fiber Assay Kit (K-TDFR) procedure?
-
How to prepare the required 78% ethanol solution that is used in the Rapid Integrated Total Dietary Fiber Assay Kit (K-RINTDF)?
-
Is it possible to test liquid samples with the Rapid Integrated Total Dietary Fibre Assay Kit (K-RINTDF)?
-
What is the purpose of the 78% ethanol solution in the Rapid Integrated Total Dietary Fiber (K-RINTDF) Assay Procedure?
-
Does the fructanase enzyme used in the Fructa Assay kits (K-FRUC & K-FRUHCK) hydrolyse Neosugar?
-
When measuring fructan in starch containing samples, i.e. maize, is there a possibility of incomplete starch hydrolysis in step B of the Fructan Assay (K-FRUC) ?
-
Does the Fructan Assay Kit (K-FRUC) specifically measure inulin content of a sample ?
-
The calibration curve in the D-Fructose/D-Glucose Assay Kit (K-FRUGL) data booklet is based on using a 4.6 mm pathlength cuvette. Can I use 10 mm path-length cuvettes?
-
Can oligosaccharides or polysaccharides be measured using the D-Fructose/D-Glucose Assay Kit (K-FRUGL)?
-
When using the D-Fructose/D-Glucose Assay Kit (K-FRUGL) for quantitative analysis what level of accuracy and repeatability can be expected?
-
Can oligosaccharides or polysaccharides be measured using the D-Fructose/D-Glucose Assay Kit (Liquid Ready) (K-FRGLQR)?
-
When using the D-Fructose/D-Glucose Assay Kit (Liquid Ready) (K-FRGLQR) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the range of the D-Fructose/D-Glucose Assay Kit (K-FRGLQR)?
-
Can oligosaccharides or polysaccharides be measured using the The D-Fructose and D-Glucose Assay Kit (MegaQuant™ Format) (K-FRGMQ)?
-
When using the The D-Fructose and D-Glucose Assay Kit (MegaQuant™ Format) (K-FRGLMQ) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What analyser would you recommend for use with the The D-Fructose and D-Glucose Assay Kit (MegaQuant™ Format) (K-FRGLMQ)?
-
Can the Galactomannan Assay Kit (K-GALM) be used to measure any type / source of galactomannan?
-
Are there any differences in the assay procedures for measuring carob and guar using the Galactomannan Assay Kit (K-GALM)?
-
The Galactomannan Assay Kit (K-GALM) gives the galactose:mannose ratio for carob is there any similar data published for guar gum?
-
What is the Mixed Linkage β-Glucan Assay Kit (K-BGLU) used to measure? What is the specificity of this kit?
-
What is mixed-linkage β -glucan that you can measure using β-Glucan Assay Kit (K-BGLU)?
-
Is it possible to specifically measure cereal beta-glucan in a mixed material of mushroom/yeast and cereal/grains using the Mixed Linkage β-Glucan Assay Kit (K-BGLU)?
-
What Matrices were used in the validation of the the β-Glucan Assay Kit (Yeast and Mushroom) (K-YBGL)?
-
What is different between β-Glucan (Yeast & Mushroom) Assay Kit (K-YBGL) and Yeast Beta-Glucan Assay Kit (K-EBHLG)?
-
Can the β-Glucan Assay Kit (Yeast and Mushroom) (K-YBGL) distinguish between β-glucans from mushrooms and those from yeast or molds?
-
When using the D-Gluconic Acid Assay Kit (K-GATE) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the D-Gluconic Acid Assay Kit (K-GATE)?
-
What is the linearity of the D-Gluconic Acid Assay Kit (K-GATE)?
-
When using the D-Glucosamine Assay Kit (K-GAMINE) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the D-Glucosamine Assay Kit (K-GAMINE)?
-
What is the linearity of the D-Glucosamine Assay Kit (K-GAMINE)?
-
Will results be incorrect if it is outside a certain pH range from the pH optimum of glucose oxidase and peroxidase in the D-Glucose Assay Kit (GOPOD Format) (K-GLUC)?
-
What is the linear range of the D-Glucose Assay Kit (GOPOD Format) (K-GLUC)?
-
In the D-Glucose Assay Kit (GOPOD Format) (K-GLUC Assay) is the colour stable at room temperature? Does the reaction continue if not read within 20 minutes?
-
How long is the GOPOD reagent (K-GLUC / R-GLC4) stable for when stored at 4˚C?
-
Can the absorbance for the GOPOD assay (R-GLC4 / K-GLUC) be measured at alternative wavelengths if 510 nm is not available?
-
What might be the cause of very low absorbance readings for glucose controls and samples in the GOPOD assay procedure (K-GLUC / R-GLC4)?
-
Can oligosaccharides or polysaccharides be measured using the D-Glucose HK Assay Kit (K-GLUHK)?
-
Can the D-Glucose Assay kit (K-GLUHK) be used to measure glucose as a component of polysaccharides in plant material?
-
What is the detection limit of the D-Glucose Assay kit (K-GLUHK)?
-
When using the D-Glucuronic/D-Galacturonic Acid Assay Kit (K-URONIC) for quantitative analysis what level of accuracy and repeatability can be expected?
-
Can the D-Glucuronic/D-Galacturonic Acid Assay Kit (K-URONIC) be used to measure galacturonic acid in pectin?
-
What is the detection limit and linearity of the D-Glucuronic/D-Galacturonic Acid Assay Kit (K-URONIC)?
-
When using the L-Glutamic Acid Assay Kit (K-GLUT) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the L-Glutamic Acid Assay Kit (K-GLUT)?
-
What is the linearity of the L-Glutamic Acid Assay Kit (K-GLUT)?
-
When using the L-Glutamine/Ammonia Assay Kit (Rapid) (K-GLNAM) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the L-Glutamine/Ammonia Assay Kit (Rapid) (K-GLNAM)?
-
What is the linearity of the L-Glutamine/Ammonia Assay Kit (Rapid) (K-GLNAM)?
-
When using the Glycerol Assay Kit (K-GCROL) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the Glycerol Assay Kit (K-GCROL)?
-
What is the linearity of the Glycerol Assay Kit (K-GCROL)?
-
When using the Glycerol GK Assay Kit (K-GCROLGK) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the Glycerol GK Assay Kit (K-GCROLGK)?
-
What is the linearity of the Glycerol GK Assay Kit (K-GCROLGK)?
-
When using the D-3-Hydroxybutyric Acid (β-Hydroxybutyrate) Assay Kit (K-HDBA) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the D-3-Hydroxybutyric Acid (β-Hydroxybutyrate) Assay Kit (K-HDBA)?
-
What is the linear range of the D-3-Hydroxybutyric (β-Hydroxybutyrate) Acid Assay Kit (K-HDBA)?
-
When using the myo-Inositol Assay Kit (K-INOSL) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the myo-Inositol Assay Kit (K-INOSL)?
-
What is the linear range of the myo-Inositol Assay Kit (K-INOSL)?
-
When using the D-Isocitric Acid Assay Kit (K-ISOC) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the D-Isocitric Acid Assay Kit (K-ISOC)?
-
What is the linear range of the D-Isocitric Acid Assay Kit (K-ISOC)?
-
When using the D-Lactic Acid (Rapid) Assay Kit (K-DATE) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the D-Lactic Acid (Rapid) Assay Kit (K-DATE)?
-
What is the linearity of the D-Lactic Acid (Rapid) Assay Kit (K-DATE)?
-
When using the D-/L-Lactic Acid (Rapid) Assay Kit (K-DLATE) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the D-/L-Lactic Acid (Rapid) Assay Kit (K-DLATE)?
-
What is the linearity of the D-/L-Lactic Acid (Rapid) Assay Kit (K-DLATE)?
-
When using the L-Lactic Acid Assay Kit (K-LATE) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit and linearity of the L-Lactic Acid Assay Kit (K-LATE)?
-
What is the linearity of the L-Lactic Acid Assay Kit (K-LATE)?
-
Can hydrogen peroxide from other suppliers be used in this Sequential/High Sensitivity Lactose Assay Kit (K-LOLAC) method?
-
Can Step C of the Sequential / High Sensitivity Lactose Assay Kit (K-LOLAC) procedure be carried out using a microplate?
-
I have used Megazyme's K-LACGAR & K-LOLAC kits for determination of lactose in “lactose-free” milk and I have obtained values of 1% with K-LACGAR and 0.2% with K-LOLAC. Why is there such a difference in values and which value should I use
-
When using the Lactose / Galactose Assay Kit (Rapid) (K-LACGAR) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the Lactose / Galactose Assay Kit (Rapid) (K-LACGAR)?
-
What is the linearity of the Lactose / Galactose Assay Kit (Rapid) (K-LACGAR)?
-
Is the Lactose/Sucrose/D-Glucose Assay Kit (K-LACSU) suitable for analysis of lactose in dairy by-products?
-
Is the Lactose/Sucrose/D-Glucose Assay Kit (K-LACSU) suitable for analysis of sucrose in wort and during fermentation?
-
With the Lactose/Sucrose/D-Glucose Assay Kit (K-LACSU), is it possible to measure lactose alone in a mixture of material in which sucrose and glucose could be present?
-
When using the Lactulose Assay Kit (K-LACTUL) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the Lactulose Assay Kit (K-LACTUL)?
-
In the Lactulose Assay Kit (K-LACTUL) some samples generate values of A2 – A1 greater than 0.3. Is this ok?
-
What is the difference between the different L-malic acid kits (K-LMAL, K-LMALAF, K-LMALMQ and K-LMALQR)?
-
Which L-Malic Acid Kit is recommended for a 96-well microplate format?
-
When using the L-malic acid kits (K-LMAL, K-LMALAF, K-LMALMQ and K-LMALQR) for quantitative analysis what level of accuracy and repeatability can be expected?
-
When using the L-Malic Acid Assay Kit (Manual Format) (K-LMAL) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the range of the L-Malic Acid Assay Kit (Manual Format) (K-LMAL)?
-
What is the detection limit of the L-Malic Acid Assay Kit (Manual Format) (K-LMAL)?
-
When using the L-Malic Acid Assay Kit (MegaQuant™ Format) (K-LMALMQ) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What analyser would you recommend for use with the L-Malic Acid Assay Kit (MegaQuant™ Format) (K-LMALMQ)?
-
What is the range of the L-Malic Acid Assay Kit (MegaQuant™ Format) (K-LMALMQ)?
-
When using the Maltose/Sucrose/D-Glucose Assay Kit (K-MASUG) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the Maltose/Sucrose/D-Glucose Assay Kit (K-MASUG)?
-
Can the Maltose/Sucrose/D-Glucose Assay Kit (K-MASUG) specifically measure maltose in the presence of maltitol and maltotriose?
-
When using the D-Mannitol Assay Kit (K-MANOL) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the D-Mannitol Assay Kit (K-MANOL)?
-
What is the linearity of the D-Mannitol Assay Kit (K-MANOL)?
-
When using the D-Mannose/D-Fructose/D-Glucose Assay kit (K-MANGL) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the D-Mannose/D-Fructose/D-Glucose Assay kit (K-MANGL)?
-
What is the linearity of the D-Mannose/D-Fructose/D-Glucose Assay kit (K-MANGL)?
-
When using the Phytic Acid Assay Kit (K-PHYT) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the Phytic Acid Assay Kit (K-PHYT)?
-
What is the linearity of the Phytic Acid Assay Kit (K-PHYT)?
-
When using the Primary Amino Nitrogen Assay Kit (K-PANOPA) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What kits are recommended to measure yeast assimilable nitrogen (YAN) during wine production?
-
What is the detection limit of the Primary Amino Nitrogen Assay Kit (K-PANOPA)?
-
Why does the calculation for the K-PDCAAS kit only use the amino acids, Proline, Lysine, Histidine and Arginine?
-
Why is the molecular weight of water subtracted for the calculation of amino acids for the K-PDCAAS assay kit?
-
How is it possible to obtain values above 1 for in vitro digestibility and amino acid score using the K-PDCAAS calculation?
-
When using the Raffinose/D-Galactose Assay Kit (K-RAFGA) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the Raffinose/D-Galactose Assay Kit (K-RAFGA)?
-
What is the linearity of the Raffinose/D-Galactose Assay Kit (K-RAFGA)?
-
When using the L-Rhamnose Assay Kit (K-RHAMNOSE) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the L-Rhamnose Assay Kit (K-RHAMNOSE)?
-
What is the linearity of the L-Rhamnose Assay Kit (K-RHAMNOSE)?
-
When using the D-Sorbitol/Xylitol Assay Kit (K-SORB) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the D-Sorbitol/Xylitol Assay Kit (K-SORB)?
-
What is the linearity of the D-Sorbitol/Xylitol Assay Kit (K-SORB)?
-
What might cause below specification Starch Damage values for the control flour when using the Starch Damage Assay Kit (K-SDAM)?
-
Can the Starch Damage Assay Kit (K-SDAM) be used to analyse pasta samples?
-
Is there any particular step or enzyme in the Starch Damage Assay Kit (K-SDAM) which may cause reproducibility problems?
-
Is it possible to check if the resistant starch values for my samples are correct when analysed using the Resistant Starch Assay Kit (K-RSTAR)?
-
What type of the resistant starch is provided as a control with the Resistant Starch Assay Kit (K-RSTAR)?
-
What is the reproducibility of the Resistant Starch Assay Kit (K-RSTAR)?
-
Does freeze drying affect the resistant starch content for analysis using K-RAPARS?
-
In the Resistant Starch (rapid) (K-RAPRS) Assay Protocol, how should samples be stored after "Step E (a) x"?
-
Is it possible to use lower centrifuge speeds than those stated in the Resistant Starch (rapid) (K-RAPRS) Assay Protocol?
-
Why does the quadruplicate glucose control in your Total Starch Assay Kit (AA/AMG) (K-TSTA) have to be incubated?
-
Why are duplicate sample measurements recommend when using the Total Starch Assay Kit (AA/AMG) (K-TSTA)?
-
Does the Regular Maize Starch that is supplied with the Total Starch Assay Kit (AA/AMG) (K-TSTA) need to be analysed by pre-treating with DMSO? How should the Regular Maize Starch Control be stored?
-
When using the Succinic Acid Assay Kit (K-SUCC) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the Succinic Acid Assay Kit (K-SUCC)?
-
What is the linearity of the Succinic Acid Assay Kit (K-SUCC)?
-
I am comparing the results from Sucrose/Fructose/D-Glucose Assay Kit (K-SUFRG) with results obtained by HPLC, and getting different values. Which method works best in general for food and beverage samples?
-
When using the Sucrose/Fructose/D-Glucose Assay Kit (K-SURFG) for quantitative analysis what level of accuracy and repeatability can be expected?
-
When using the Sucrose/Fructose/D-Glucose Assay Kit (K-SUFRG) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What concentration of acetaldehyde in the sample causes interference in the Total Sulfite Assay Kit (K-TSULPH & K-SULPH)?
-
How stable are the sulfite standards and samples used in the Total and Free Sulfite Assay Kit (K-TSULPH & K-SULPH)?
-
When using the Total and Free Sulfite Assay Kit (K-TSULPH & K-SULPH) for quantitative analysis what level of accuracy and repeatability can be expected?
-
Why are results for sulfite standards ~ 20% lower than expected when using the Total Sulfite Assay Kit (Enzymatic) (K-ETSULPH)?
-
Is an absorbance change observed of 0.1-0.2 for the blank sample normal when using the Total Sulfite Assay Kit (Enzymatic) (K-ETSULPH)?
-
When using the Total Sulfite Assay Kit (Enzymatic) (K-ETSULPH) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What concentration of acetaldehyde in the sample causes interference in the total sulfite (TSO2) assay of the Total and Free Sulfite Assay Kit (K-SULPH)?
-
How stable are the sulfite standards and samples used with the Total and Free Sulfite Assay Kit (K-SULPH) ?
-
When using the Total and Free Sulfite Assay Kit (K-SULPH) for quantitative analysis what level of accuracy and repeatability can be expected?
-
When using the Tartaric Acid Assay Kit (K-TART) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the Tartaric Acid Assay Kit (K-TART)?
-
What is the linearity of the Tartaric Acid Assay Kit (K-TART)?
-
When using the Urea/Ammonia Assay Kit (Rapid) (K-URAMR) for quantitative analysis what level of accuracy and repeatability can be expected?
-
What is the detection limit of the Urea/Ammonia Assay Kit (Rapid) (K-URAMR)?
-
What is the linearity of the Urea/Ammonia Assay Kit (Rapid) (K-URAMR)?
-
How does the value for endo-xylanase activity obtained with the XylX6 assay compare to the value obtained using reducing sugar assays with polysaccharide substrates?
-
How to determine the relevant dilution buffer / extraction buffer in K-XylX6
-
Why is 0.5 mg/mL BSA added to the extraction buffer in K-XylX6?